Categories
> PCD series is available for OEM and ODM. KR series is not allowed
> Delivery terms: EXW factory
> This is RFID card reader only, need to work with ACB series Control board
> Delivery time: If under 500pcs/model, within 2-3working days once confirmed
Brand:
S4AItem NO.:
PCD-122No Drive Issuing Device EM ID USB for Access Control
Model No.: PCD-122
Material | ABS+Epoxy |
Size | 96 x 61 x 12 mm |
Item | 13.56mhz Rift USB Card Reader |
Voltage | DC12V |
Static Current | less than 50mA |
Colour | Black and another colour |
Reading Distance | ID: 3~15cm / IC: 2~8cm |
Temperature | -25℃~85℃ |
Reader speed | less than 0.2sec |
Humidity | 10%~90% |
Support | 125KHz EM ID/13.56MHz MF IC/ Dual-frequency at the same time |
Card Type | EM-ID card, Middle distance ID card, General ID card, Dual-frequency card |
Frequency | 125KHz/13.56MHz / Dual frequency |
Interface | USB |
Built-in | Antenna,speaker,buzzer,red(blue)green color LED |
Transmission | USB |
Supporting System | compatible with Windows98/2000/XP |
Special Provide | Logo printing,long cable,Reader module,Dual-frequency(ID&IC) |
Application | For access control, attendance, fees, patrol, card, building on say, parking systems, highways and RFID outdoor application. |
S4A Datesheet_No Drive Issuing Device EM ID USB for Access Control
> PCD series is available for OEM and ODM. KR series is not allowed> Delivery terms: EXW factory> This is RFID card reader only, need to work with ACB series Control board> Delivery time: If under 500pcs/model, within 2-3working days once confirmed
> Material: Acrylic panel> Wiegand 26/34 output> Dimension: 86x86x8mm> Voltage: DC9~15V> Working Frequency: 125KHz & 13.56MHz> Working Indicator: Beeps and LED Indicator
>Working current: 120mA/240mA>Safety type: power on to close the door and power off to open the door>Maximum pull: 70kg linear pull
>Power supply:AC/DC 12V- 24V>Quiescent Current:15mA>Operating current:80mA (when powered by DC12V)
>Emergency Power Supply: USB powered>Applicable door thickness: 40-120mm>Storage capacity: Card/password/fingerprint a total of 300 groups
>Dimension: 86x86x50mm>Current Rating: 3A 36VDC Max>Output Contact: NO\NC\COM
The extender does not distinguish between receiving and sending, and it can be used if the wiring is correctPower supply is required at both ends of the transceiver, power supply 9~24V/30mAThe signal delay is about 50-150ms
> Voltage: DC12V 0.4A> Total Tongue Length: 10mm> Power On: <3S> Lock size: 27 x 15 x 17.5mm
S4A appreciate any of your inquiries and sincerelyhope to enjoy a fruitful long-term business relationship with youto share in the mutual benefits, If you have any questions, please feel free to contact us.
IPv6 network supported
English
français
Deutsch
русский
italiano
español
português
العربية
Türkçe
Tiếng Việt
Indonesia
