Categories
>Battery capacity:3200mA
>Input voltage:220V
>The output voltage:DC24V 3.2AH
Brand:
S4AItem NO.:
3200Automatic door backup power UPS battery 24V universal
Model No.: 3200
What is a UPS battery backup used for?
A UPS is a backup system that provides power in the event of a utility failure. By supplying an adequate window to safely shut down sensitive equipment, a UPS helps prevent data loss and minimizes the stress of a hard shutdown on electronics.
What is the difference between UPS and battery backup?
It's common to assume that uninterruptible power supply (UPS) and battery backup are the same things, but they are very different. UPS refers to an advanced version of battery backup, another way of saying it is, that all the uninterruptible power supplies are battery backups but with higher protection rates.
Battery capacity | 3200mA |
Input voltage | 220V |
The output voltage | DC24V 3.2AH |
Standby time | 15 hours |
It can detect moving or standing people or objects, keep safety when people or equipments enter from rotation door or automatic swing door.> Sensor for revolving door M-227A> Motion light curtain sensor M-227B> Operation voltage: AC/DC12-36V> Current consumption: <100mA
Specially designed for automatic door back-up power. The power can help automatic door work normally once power off (open-close about 500 times, around 7hours), or keep door open automatically based on fire evacuation requirements.> Input Voltage: AC220V 50Hz> Output Voltage: DC24V 2.6AH; DC12V 5.2AH> Working Mode: Automatic working or keep opening
>Power supply:AC/DC 12V- 24V >Quiescent Current:15mA >Operating current:80mA (when powered by DC12V)
> Supply power: AC/DC 12~30V > Reaction time: Relay output<45ms > Dimension: 186x175x53mm > Detection mode: Receive the open signal by the truncation of infrared ray which operated by foot > Widely be used in the operating room of hospital and laboratory to prevent hand pollution
Single door Network access control board built-in TCP/IP, Support APP/4G/Web-server with free software and SDK1door support 2pcs RFID Access reader or 1pcs RFID reader+1pcs exit push button
> Input: 100-240V AC50/60Hz> 1202: 12V / 2A / 24W> 1205: 12V / 5A / 60W> 1210: 12V / 10A / 120W> 2402: 24V / 2A / 46W> 2403: 24V / 3A / 72W> 2405: 24V / 5A / 120W
> Material: 304 Stainless Steel> Dimension: 65x15.5x5cm 100x15.5x5cm
>Working voltage: 12 >Working current: 12V >Material: Copper wire
S4A appreciate any of your inquiries and sincerelyhope to enjoy a fruitful long-term business relationship with youto share in the mutual benefits, If you have any questions, please feel free to contact us.
IPv6 network supported
English
français
Deutsch
русский
italiano
español
português
العربية
Türkçe
Tiếng Việt
Indonesia
