Products
Products
Home /

Tuya Access Control and Parts

/

Wifi Tuya Module

/4CH WiFi Tuya Smart Switch AC/DC 7-32V Remote control support Jog Module

New Products

4CH WiFi Tuya Smart Switch AC/DC 7-32V Remote control support Jog Module

>Input:AC/DC 7V - 32V

>Network: 4G

  • Brand:

    S4A
  • Item NO.:

    S4A-4CH
  • Specifications
  • Download

4CH WiFi Tuya Smart Switch AC/DC 7-32V Remote control support Jog Module

Model No.:S4A-4CH/S4A-4CH-H


Tuya Remote Control


What is a WiFi relay switch?

WiFi Relays are equipped with firmware built into the board that will allow you to control one relay at a time, a bank of relays or all relays at once with manual and automatic refreshing command set. WiFi Relay Controllers allow wireless computer controlled switching from any computer connected to a network.


How do I connect my Tuya Smart Switch?

To connect the device in AP mode, switch the light on and, after 10 seconds, switch it off and then switch it on and off continuously until it starts . ashing quickly (about 3 times a second). Continue switching it on and off until it starts to . ash slowly (about once every 3 seconds).


Input

AC/DC 7V - 32V

Network

4G

Frequency band

2.4G

Connection method

Wifi


Tuya Remote Control

Tuya Remote Control

S4A Datesheet_4CH WiFi Tuya Smart Switch AC/DC 7-32V Remote control support Jog Module

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
Tuya Wifi Switch Button
1CH Tuya wifi switch button single relay module supports 7-32V

>Input: 5v MicroUSb/ DC 7 - 32V>Output: 10A Max,1 gang

2CH Wifi Tuya module
2CH WiFi Smart Switch AC/DC 7V-32V support 433MHz remote control

>Input:AC/DC 7V-32V>Frequency:433Mhz(Without remote control)

1m long range rfid reader
1m Uhf Long Range Rfid Reader

> Output Interface: WG26,WG34,RS485> Operating Voltage: DC12V 80MA> Size: 121x78x22mm

Nfc Smart Card Reader
Smart Locks Wiegand 26/34 NFC Card QR Code Proximity RFID CARDS Reader

> NFC RFID Access Control Reader> Material: Plastic pane> Wiegand 26/34 output> Dimension: 86x86x8mm> Voltage: DC9~15V> Working Frequency: 125KHz & 13.56MHz> Working Indicator: Beeps and LED Indicator

Access Control Solution
Two Doors TCP/IP Network Access Control Panel Wiegand Access Control

> Control 2 door, 4 readers> Communication Protocol: TCP/IP> Door control: 2 doors, 2pcs relay> Power Supply Input: 12V DC

Door Cord
Door Cord Loop with Sprint Plastic Caps

>Hoses inner diameter: 8mm>Hoses outer diameter: 11mm>Pass 1 network cable

Access Card reader
Rfid Reader and Access Card Reader

> Card type: 125KHz or 13.56MHz Card> PCD-104EM: 125KHz (WG26 output)> PCD-104Mifare: 13.56MHz (WG34 output)

Automatic Door Safety Beam Sensor
Automatic Door Operators Beam Photocell Sensor

>Power Supply AC/DC 12~24V (-/+10%)>Static Current 30mA (DC12V)>Action Current 110mA (DC12V)

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact