Products
Products
Home /

Automatic Door Opener

/Electric Automatic Swing Door Opener

New Products

Electric Automatic Swing Door Opener

S4A Automatic Flat door systems with Pull arm or Push arm, support 110V  or 220V with a brushed motor

1. Power supply: 110V or 220V

2. Opening time: 3~7s / 90°

3. Opening and holding time: 1-30s

4. Protection level: IP12D

  • Brand:

    S4A
  • Item NO.:

    ED100
  • Specifications
  • Wiring Diagram
  • Package

Electric Automatic Swing Door Opener

Model No.: ED100


Power supply

110V or 220V

Opening time

3~7s / 90°

Opening and holding time

1-30s

Temperature

-20℃~55℃

Protection level

IP12D

Dimensions

516x105x82mm

Packing box

626x197x152mm

Weight

8.5kg


S4A automatic swing door opener is low energy automatic with a swing door opener that is activated by push buttons. This system operates in both automatic and manual modes, it makes the electronic door opener and closer highly adapt to voltage fluctuations between 110 or 220VAC +/-10%,  More energy-saving and durable than an ordinary single input voltage. 

The simple yet secure system for areas such as offices, hospitals, elderly homes, banks, commercial locations, and much more. 

It supports 2ways working mode:

1: standalone access controller, connect it to power, power on, 

   then we could open it by remote control and close it automatically

2: Connect it with RFID door access control systems, Enter by Face, RFID, Pincode or Finger

   and exit by EB-16 or EB-17 Non-touch button or M-204 Microwave Sensor.

Main Features:

1. An advanced and reliable microprocessor controller is applied.
2. Brushless motor with self-locking, a long life span, and energy conservation.
3. Opening & Closing Speed adjustable.
4. Automatic / Lock/Oneway/Half-open/ Hold-open status can be set by remoted key.
5. Opening and closing smooth with low noise.
6. Safety interlock and electric lock function.
7. Support multiple access control systems and Fire Alarm System
8. Auto-Reverse

Electric Automatic Swing Door Opener

Electric Automatic Swing Door Opener

Here is the wiring diagram to connect with S601 metal standalone access controller, Electromagnetic locks EL-600SD and Microwave Sensor, as below : Electric Automatic Swing Door Opener

Here are the installation mode for both Pull-Arm and Push-Arm,as below:

Electric Automatic Swing Door OpenerElectric Automatic Swing Door Opener

Electric Automatic Swing Door Opener

Electric Automatic Swing Door Opener

Electric Automatic Swing Door Opener

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
SM150
Automatic Sliding Door Operator

1. Aluminum shell 2. Security anti-leakage switch 3. Remote control x2 4. Microwave Sensor

Microwave Sensor
Microwave motion sensor automatic door infrared sensor

1. Voltage: AC/DC 12-36V2. Relay output: N.O.-point output(relay)3. Maximum switching voltage: 48V AC/DC4. Maximum switching current: 0.5 A  AC/ 1.0A   DC5. The largest power switch: 55VA/24W

Air Break Switch
Glass break switch reset emergency alarm switch

Dimension: Red, Green, White

RFID Access Control
Standalone RFID Access Control for Office

> Card type: EM or MF Card> Metal structure design, anti-vandal> Digital backlit keyboard> All-in-one, WG26 output/input> Three-way to open the door, card, password, card + password> The doorbell button and interface: buttons and isolation circuit, connect to any external bell

Fail Secure Eletric Bolt
Fail Secure Eletric Bolt With Mort Lock Cylinder

> Voltage: DC12V> Start Current: 950mA> Standby Current: 150mA

RS485 Relay board
RS485 Relay board for one way Access Controller

ACB-R01 RS485 Single door access Control Board with free software Control 1 door and 2pcs RFID reader

Network access control
Two Door Network access control

Double door Network access control board built-in TCP/IP, Support APP/4G/Web-server with free software.

Access Door Electromagnetic Locks 500KG
Access Door Electromagnetic Locks 500KG (1000Lbs)

> Voltage: DC12V or DC24V> Holding Force: 500KG (1200Lbs)> Current Draw: 12V/420mA 24V/210mA

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact