Products
Products
Home /

Tuya Access Control and Parts

/

Wifi Tuya Module

/2CH WiFi Smart Switch AC/DC 7V-32V support 433MHz remote control

New Products

2CH WiFi Smart Switch AC/DC 7V-32V support 433MHz remote control

>Input:AC/DC 7V-32V

>Frequency:433Mhz(Without remote control)

  • Brand:

    S4A
  • Item NO.:

    S4A-2CH
  • Specifications
  • Wiring Diagram
  • Download

2CH WiFi Smart Switch AC/DC 7V-32V support 433MHz remote control

Model No.:S4A-2CH/S4A-2CH-H



2CH Wifi Tuya module


What is a WiFi relay switch?

WiFi Relays are equipped with firmware built into the board that will allow you to control one relay at a time, a bank of relays or all relays at once with manual and automatic refreshing command set. WiFi Relay Controllers allow wireless computer controlled switching from any computer connected to a network.


How do I connect my Tuya Smart Switch?

To connect the device in AP mode, switch the light on and, after 10 seconds, switch it off and then switch it on and off continuously until it starts . ashing quickly (about 3 times a second). Continue switching it on and off until it starts to . ash slowly (about once every 3 seconds).


Input

AC/DC 7V-32V

Frequency

433Mhz(Without remote control)

Network

4G

Frequency band

2.4G

Connection method

Wifi

2CH Wifi Tuya module

2CH Wifi Tuya module

S4A Datesheet_2CH WiFi Smart Switch AC/DC 7V-32V support 433MHz remote control

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
Tuya Wifi Switch Button
1CH Tuya wifi switch button single relay module supports 7-32V

>Input: 5v MicroUSb/ DC 7 - 32V>Output: 10A Max,1 gang

Power Supply
DC 12V New Door Access Control System Switch Power Supply Controller 3A

> Input Voltage: AC100-260V> Output Voltage: DC12V 5A

Fire Switch
Access Control Emergency Door Opening Button Fire Switch(Red)

>Dimension: 86x86x50mm>Current Rating: 3A 36VDC Max>Output Contact: NO\NC\COM

Switch Panel button
NO/NC/COM Switch Panel button

>Material: Fireproof>Installation Mode: Surface Mount>Input: DC12V>Contact Rating: 3A/125-250VAC>Output Contact: NO/COM>Mechanical Life: 500000 tests 

Access Control Keypad
Fingerprint Access Control Keypad with Wiegand 26-44bit Interface Support 2000 Users for 125khz RFID Card

> Two Accesses: Fingerprin, Pincode> Waterproof, up to IP66> Metal Design & Anti-Vandal> Standalone, one relay> 1,000 fingerprints, 2,000 PIN users> Supports 4-6 digits PIN> Wiegand 26-44 output> Pulse mode, toggle mode> Multi fingerprints/PINs access  > Interlock, Support Principal Use

Magnetic Reed Switch
Magnetic Reed Switch normally open

>Sensing distance: 30mm>Switch form: NO-Normally Open/NC-Normally Close/NO+NC>Electrical parameters: maximum power 10W, working voltage 100VDC, working current 500A

Adhesive inlay label
UHF RFID tag U8 chips adhesive inlay label

>Chip: U8 chip>Label size: 98x27mm>Reading distance: 12m

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact