Access control system
Home /

Access control system

What is the difference between ID and IC card for access control?

June 08 , 2023

ID access control and IC access control systems are similar but different. In fact, the scope of use of both is similar, but IC access control has encryption function and large storage capacity. It is widely used in card and membership card, while ID card is a read-only card. , Widely used in channel access control and parking lot.


Comparing the two systems, the differences are as follows:

1. Security: IC access control uses IC cards, and ID access control uses ID cards. The security of IC cards is much greater than that of ID cards. The card number in the ID card is read without any authority and is easy to imitate. The reading and writing of data recorded in the IC card requires corresponding password authentication, and even each area in the card has different password protection to fully protect data security. The password for writing data in the IC card and the password for reading data can be changed. Setting it differently provides a good hierarchical management method to ensure system security. 


2. Recordability: ID cards cannot write data, and the recorded content (card number) can only be written once by the chip manufacturer. The developer can only read the card number and use it, and cannot formulate new number management according to the actual needs of the system. system. IC card can not only read a large amount of data by authorized users, but also can write a large amount of data (such as new card number, user authority, user information, etc.) 

Access Control Card

3. Storage capacity: ID card only records the card number; while IC card (such as Philips mifare1 card) can record about 1000 characters.


4. Offline and network operation: Since there is no content in the ID card, the authority of the card holder and the operation of the system function are completely dependent on the support of the computer network platform database. The IC card itself has recorded a large amount of user-related content (card number, user information, authority, consumption balance, etc.), which can be completely separated from the computer platform to realize the operation mode of automatic conversion between networking and offline, and can be used on a large scale. Less wiring required. 


5. Extended application of one card: ID card has no records and no partitions, so it can only rely on network software to process the information of each subsystem, which greatly increases the dependence on the network; if the user wants to add function points after the completion of the ID card system , you need additional wiring, which not only increases the difficulty of engineering construction, but also increases unnecessary investment. Therefore, using ID cards as a system makes it difficult to expand the system and realize a real all-in-one card. The IC card storage area itself is divided into 16 partitions, each partition has a different password, and has independent management functions for multiple subsystems, such as the first partition for access control, the second partition for consumption, and the third partition for employee attendance and so on. Fully realize the purpose of one card, and can achieve a completely modular design. Even if the user wants to add function points, he does not need to rewire, only need to add hardware and software modules, which is convenient for the IC card system to be upgraded and expanded at any time in the future. Reduce duplication of investment. For example, an ID card one-card system was established in a community in Shenzhen, but due to the above-mentioned drawbacks of the ID card system, the system could not be put into daily use, so the system had to be completely abolished, and the IC card one-card system was adopted later.

Author:Written by Ms.Vivian He from S4A INDUSTRIAL CO.,LIMITED

Contact Us
  S4A-Security For All.S4A Industrial Co., Limited, Founded in 2010, We have been dedicating in access control production R&D and sales for 10year till now. With the belief that we do one thing well in a lifetime, our CEO has been in this industry for 15 years. During the past 10 years, our products have been exported to various countries and regions. And 90% of customers come from the recommendations of cooperative customers, and 80% of the turnover comes from cooperative customers in the past 10years.Your business is a plant, we are the gardener, our mission is to water and fertilize the plant, and make it become the towering tree. We attach great importance to the partner's appeal, customer's suggestions, and feedbacks. To strengthen Product quality awareness, client's service awareness. Our clients and S4A are on the same path walking for many years.       S4A's future would be even more brilliant, this is related to all of our staff's working sweat. When you join this team, you will feel an invisible power to drive walk forward. S4A mainly produces a series of security Door Access Control such as:Network Access Controller, Locker board, Electromagnetic lock, Standalone door Controller, Automatic door opener, etcOur team can manufacture products, sell products, and do after-sales.In the realm of access control, one company stands out for its unwavering commitment to providing security services for everyone. S4A, which stands for "Security for All," has been at the forefront of access control technology for the past 13 years. With its own state-of-the-art factory and a strong focus on research and development, S4A has continuously delivered cutting-edge access control machines with the latest functions. Their dedication to product quality, customer feedback, practicability, and cost performance sets them apart as a leader in the industry.Factory and R&D Expertise:S4A takes pride in its fully-equipped factory, where skilled engineers and technicians work tirelessly to develop and manufacture access control solutions that meet the highest standards. The company's investment in research and development has resulted in a steady stream of innovative products that cater to evolving security needs.By staying ahead of the curve, S4A ensures that their customers have access to the latest advancements in access control technology.Quality Assurance and Customer Feedback:At S4A, product quality is of paramount importance. The company adheres to rigorous quality control procedures throughout the manufacturing process to guarantee the reliability and durability of their access control machines. Each product undergoes comprehensive testing to ensure it meets industry standards and exceeds customer expectations. S4A also places great value on customer feedback, actively seeking input to continuously improve their products and services. By listening to their customers, S4A maintains a customer-centric approach and delivers solutions that address real-world security challenges.Practicability and Cost Performance:S4A understands that access control solutions must not only be technologically advanced but also practical and cost-effective. The company's emphasis on practicability means that their products are designed to be user-friendly, easily integrated into existing systems, and adaptable to various environments. S4A's access control machines are known for their intuitive interfaces, simple installation processes, and seamless compatibility with other security systems. Additionally, S4A strives to provide cost-effective solutions without compromising on quality. Their competitive pricing ensures that security is accessible to businesses and individuals of all sizes.With 13 years of industry experience, S4A has cemented its position as a leading provider of access control solutions. Through their dedication to "Security for All," the company has set a benchmark for excellence in product quality, customer satisfaction,practicability, and cost performance. S4A's in-house factory and research and development capabilities enable them to stay at the forefront of technological advancements in the field of access control. As the company continues to evolve and innovate, S4A remains committed to empowering individuals and organizations with the highest level of security, ensuring that everyone can enjoy the peace of mind that comes with a reliable and efficient access control system.We can create value for you!Quality takes great importance for a company's credibility, and buyer's every penny spend must worth it. That is our most basic principle. Our business mainly for wholesale, so we could offer large quantities at competitive prices. During the past 10 years, We work hard to create value for our customers, and with our help, customers have an increasing market share. 99% of the customer...<
  • Address

    Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:2nd Floor of Jinmin'an Industrial Zone, #529, Bulong Rd. Bantian St. Longgang Dist. Shenzhen, PRC.

  • Call us

    0086 755 29450011

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact