Warmly welcome to visit our office and factory!

 
PRODUCTS Products
News / News More
CONTACT US
S4A Industrial Co.,Limited
Sales Hotline:  86 755 2945 0011
whatsapp/mob: 86 134 1050 0721
E-mail: sales@s4a-access.com
Address: 6th Floor, Haotai Industrial Zone,Minzhi Road,Longhua New District,Shenzhen,PRC. 518131

Durable Narrow Electric Bolt Lock

Project Introduction:

1: Size of stainless steel bolt:12.6MM;

2: Sticking-out length: 15MM


The crowd:
product information
  • Product parameters
  • Connection Diagram
  • Quality assurance
  • Package

Durable Narrow Electric Bolt Lock


BL-N2000 electric bolt lock is controlled with an intelligent circuit, and its working voltage is DC12V.A

locking delay circuit is set at the side of the lock for choice among 0/3/6/9 seconds by the user.

 

Locking delay can be selected to prevent from bolt's being sprung out when the door is not closed stably. 

A door detection circuit is designed in the bolt lock, which is led out of the lock through 

a wire for the user to detect and monitor on/off status of the door.

 

II. Instruction for use and installation:

 

1. Prior to use, please read the instruction carefully, check if major parts are complete, and prior to installation, 

try to simulate connection as per electric wiring diagram following working way of the electric bolt lock 

and perform actual installation after the lock works normally.

 

2. The electric bolt lock consists of two major components (1) magnet seat and (2) main body of electric bolt lock. 

At installation, interval between the magnet seat and positive side of the bolt lock shall not be more than 3mm. 

Point the bolt hole on magnet seat right at the bolt on the lock and place the magnet in the center of the lock as shown in Figure 1.

 

3. Led wires of six colors stick out of the tail part of the lock: red, black, brown, grey, green and

orange, as shown in Figure 1. Red wire is for positive pole of power supply of the bolt, which is

connected to power of DC12V (+) or positive power line of a controlled power supply.

 

Black wire is for negative pole of power supply of the bolt, which is connected to power of DC12V (-).

 

Brown wire is door-opening control wire of the lock (OPEN). When it is connected to negative pole of power supply, 

the lock will be opened. It is under control of door-opening button or access control part.

 

Grey, green and orange wires are door detecting wire and they are used to detect if the door is in the open or closed state.

 

Grey wire is public point (COM)

 

green wire is normally open point (NO) and orange wire is normally closed point (NC), as shown in Figure 2. 

After the door is closed in place, the connecting states of normally open and normally closed points change with each other.


 Durable Narrow Electric Bolt Lock


4. DC12V input wiring of electric bolt lock is as shown in Figure 3.


 Durable Narrow Electric Bolt Lock

 

5.Adjustment switch for locking delay is set at the side of the lock. The time for locking delay can be selected by 

changing position of the toggle switch. The method for setting is as shown in Figure 4.

Durable Narrow Electric Bolt Lock 

6.The method for installation is as shown in Figure 5.


Durable Narrow Electric Bolt Lock

III. Major technical parameters:

 

Working voltage: DC 12V

Red: Positive pole ( + )

Black: Negative pole ( - )

Current: Starting current is 0.95A and working current is 0.12A

Locking delay: 0/3/6/9S


LED indication of bolt status: Red light when bolt return and green light when the bolt sticks out

Detection of door status: NO/NC

 

Size of stainless steel bolt :12.6MM;Sticking-out length: 15MM

Size of magnet seat: 84 (L) X 25mm (W)

Outer dimension of lock body: 168 (L) X 25 (W) X 37mm (D)

Size of decoration panel: 78(L) X 30 (W) X 0.8mm (D)

Size of extension rack: 28 (L) X 23 (W) X 4mm (D)

 

IV. Notes for caution:

 

1.The users shall take measures to prevent from moisture and water.

2.Wrap connectors that have not been used with insulating tapes separately.


Durable Narrow Electric Bolt Lock

From the day of purchasing Crypton & S4A products 

(in formal purchase invoice date, here in after referred to as: the purchasing date) , 


Crypton &S4A offer you free warranty 

(All Electric Drop Bolt lock and brackets within 1year quality guarantee (include OEM&ODM order)



There will be labour and parts cost charged if the warranty period is expired; 

If the product need to be renovated, there will be labour cost and handling cost.




News
Sales Hotline: 86 755 2945 0011
Mob: 86 134 1050 0721
E-mail : sales@s4a-access.com
Address : 6th Floor, Haotai Industrial Zone,Minzhi Road,Longhua New District,Shenzhen,PRC. 518131
Copyright ©2017 - 2018  S4A Industrial Co.,Limited   Crypton Electronic Co.,Limited 
犀牛云提供云计算服务
X
1

QQ设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 86 755 29450011
  • 86 134 1050 0721
6

二维码管理

等待加载动态数据...

等待加载动态数据...

3

SKYPE 设置

展开