Warmly welcome to visit our office and factory!
Hotline 86 755 29450011
PRODUCTS Products
News / News More
CONTACT US
S4A Industrial Co.,Limited
Sales Hotline:  86 755 2945 0011
whatsapp/mob: 86 134 1050 0721
E-mail: sales@s4a-access.com
Address: 6th Floor, Haotai Industrial Zone,Minzhi Road,Longhua New District,Shenzhen,PRC. 518131

Touch Screen Standalone Access Controller

Project Introduction:

1:Metal with strong Zinc Alloy

2:Touch-screen keypad

3:Support 2000users.Card+Pin

4:Backlight touch keys

5: Support WG26input and output


The crowd:
product information
  • Product parameters
  • Connection Diagram
  • Quality assurance
  • Package

Touch Screen Standalone Access Controller - support OEM logo


1. Packing List

Name

 Quantity

Remarks

Keypad

   1


User manual

   1


Screw driver

   1

Φ20mm×60mm,Special for keypad

Rubber plug

   2

Φ6mm×30 mm, used for fixing

Self tapping screws

   2

Φ4mm×28 mm, used for fixing

Star screws

   1

Φ3mm×6mm, used for fixing

Please ensure that all the above contents are correct. If any are missing please notify the supplier of the unit.


2. Quick Reference Programming Guide

To enter the programming mode

*  Master code  #

999999 is the default factory master code

To exit from the programming mode

 *

Note that to undertake the following programming the master user must be logged in

To change the master code

0  New code  #  New code  #

The master code can be 6 to 8 digits

To add a PIN user.

 

1  User ID number  #  PIN # 

The ID number is any number between 1 & 2000. The PIN is any four digits between 0000 & 9999 with the exception of 1234 which is reserved. Users can be added continuously without exiting programming mode

To add a card user

1  Read Card  #

Cards can be added continuously without exiting programming mode

To delete a PIN or a card user.

2  User ID number  #  for a PIN user or   

2  Read Card  #  for a card user  

Users can be deleted continuously without exiting programming mode

To unlock the door for a PIN user

Enter the PIN then press#

To unlock the door for a card user

Present the card


3. Description 

The unit is single door multifunction standalone access controller or a Wiegand output keypad or card reader. It is suitable for mounting either indoor or outdoor in harsh environments. It is housed in a strong, sturdy and vandal proof Zinc Alloy electroplated case which is available in either a bright silver or matt silver finish. The electronics are fully potted so the unit is. This unit supports up to 2000 users in either a Card, 4 digit PIN, or a Card + PIN option. The inbuilt card reader supports 125KHZ EM cards,. The unit has many extra features including lock output current short circuit protection, Wiegand output , and a backlit keypad. These features make the unit an ideal choice for door access not only for small shops and domestic households but also for commercial and industrial applications such as factories, warehouses, laboratories, banks and prisons.


4. Features

Strong Zinc Alloy Electroplated anti-vandal case

Full programming from the keypad

2000 uses, supports Card, PIN, Card + PIN

Can be used as a stand alone keypad

Backlight keys

Wiegand 26 input for connection to external reader

Wiegand 26 output for connection to a controller      

Adjustable Door Output time, Alarm time, Door Open time

Very low power consumption (30mA) 

Fast operating speed,<20ms with 2000 users

Lock output current short circuit protection

Easy to install and program

Built in light dependent resistor (LDR) for anti tamper

Built in buzzer

Red, Yellow and Green LEDS display the working status


5. Specifications 

Operating Voltage

DC 12V±10%

User Capacity

2000

Card Reading Distance

3-6 cm

Active Current

<60mA

Idle Current

25±5 mA

Lock Output Load

Max 3A

Alarm Output Load

Max 20A

Operating Temperature

-45℃~60℃

Operating Humidity

10%- 90% RH

Adjustable Door Relay time

0 -99 seconds

Adjustable Alarm Time

0- 3 minutes

Wiegand Interface

Wiegand 26 bit

Wiring Connections

Electric Lock, Exit Button, External Alarm,External reader


6. Installation

l Remove the back cover from the keypad using the supplied special screw driver

l Drill 2 holes on the wall for the Self tapping screws and I hole for the cable

l Put the supplied rubber bungs to into the two holes

l Fix the back cover firmly on the wall with 2 Self tapping screws

l Thread the cable through the cable hole

Attach the keypad to the back cover.

Touch Screen Standalone Access Controller

7. Wiring

Colour

Function

Description

Pink

BELL_A

                                                Doorbell button one end

Pale blue

BELL_B

                                           Doorbell button to the other end

Green

D0

                                                         WG output D0

White

D1

                                                         WG output D1

Grey

ALARM

                                Alarm negative(alarm positive connected 12 V+)

Yellow

OPEN

                               Exit button one end(the other end connected GND)

Brown

D_IN

                            Magnetic switch one end(the other end connected GND)

Red

12V+

                                                  12V + DC Regulated Power Input

Black

GND

                                                   12V - DC Regulated Power Input

Blue

NO

                           Relay normally-on end(Connect positive electric lock "-")

Purple

COM

                                               Relay Public end, connect GND

Orange

NC

                               Relay Closed end(connect negative electric lock "-")


8. To Reset to Factory Default

      a. Disconnect power from the unit

      b. Press and hold # key whilst powering the unit back up

      c. On hearing two “Di” release # key, system is now back factory settings

      

Please note only installer data is restored, user data will not be affected


9. Anti Tamper Alarm

The unit uses a LDR (light dependent resistor) as an anti tamper alarm. If the keypad is removed from the cover then the tamper alarm will operate.


10.Sound and Light indication

Operation Status

Red Light

Green Light

Yellow Light

Buzzer

Power on

-

Bright

-

Di

Stand by

Bright

-

-

-

Press keypad

-

-

-

Di

Operation successful

-

Bright

-

Di

Operation failed

-

-

-

DiDiDi

Enter into programming mode

Bright

-

-


In the programming mode

-

-

Bright

Di

Exit from the programming mode

Bright

-

-

Di

Open the door

-

Bright

-

Di

Alarm

Bright

-

-

Alarm


  common power supply diagram: 

Touch Screen Standalone Access Controller

special power supply diagram:

Touch Screen Standalone Access Controller

From the day of purchasing Crypton & S4A products 

(in formal purchase invoice date, here in after referred to as: the purchasing date) , 


Crypton &S4A offer you free warranty 

(All Standalone access control within 1year quality guarantee (include OEM&ODM order)


There will be labour and parts cost charged if the warranty period is expired; 

If the product need to be renovated, there will be labour cost and handling cost.


News
Sales Hotline: 86 755 2945 0011
Mob: 86 134 1050 0721
E-mail : sales@s4a-access.com
Address : 6th Floor, Haotai Industrial Zone,Minzhi Road,Longhua New District,Shenzhen,PRC. 518131
Copyright ©2017 - 2018  S4A Industrial Co.,Limited   Crypton Electronic Co.,Limited 
X
1

QQ设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 86 755 29450011
  • 86 134 1050 0721
6

二维码管理

等待加载动态数据...

等待加载动态数据...

3

SKYPE 设置

展开